News

Industry News

Company News

Blog

How long does the EPS emergency power supply provide power?

How long does the EPS emergency power supply provide power?

The duration of continuous power supply provided by an EPS emergency power supply shall be determined on a case-by-case basis. According to the national standard GB 17945-2010, “Fire Emergency Lighting and Evacuation Direction Systems,” when the mains power is interrupted, the EPS emergency power supply must provide continuous power for no less than 90 minutes. This requirement not only ensures adequate emergency lighting during fire-related evacuations but also meets the lighting needs of firefighters during rescue operations.

01

2025

/

12

Application and Solution Analysis of UPS Power Supplies in the Radio and Television Industry

Application and Solution Analysis of UPS Power Supplies in the Radio and Television Industry

In the broadcast and television industry, a stable power supply is critical for ensuring program quality and protecting equipment integrity. Nevertheless, the risk of power failures and sudden outages remains, which can lead to equipment malfunctions, broadcast interruptions, and equipment damage—resulting in substantial financial losses for broadcasters. To mitigate these risks, many broadcast and television organizations have adopted UPS systems as backup power solutions.

20

2025

/

11

UPS Fault Analysis and Maintenance Methods

UPS Fault Analysis and Maintenance Methods

I. First, check the UPS insulation. In the EPS2000, the DC ground of the module section is floating and electrically isolated from the frame; therefore, the insulation between the module and the frame must be carefully considered, as a potential difference of several tens of volts typically exists between them. II. Second, read the fault alarm information displayed on the UPS monitor. III. Zero-voltage reference point

09

2025

/

10

Uninterrupted Power Supply: The Role and Advantages of UPS

Uninterrupted Power Supply: The Role and Advantages of UPS

As modern society becomes increasingly dependent on electricity, uninterruptible power supplies (UPS) play a critical role in both our daily lives and workplaces. As a type of power protection device, a UPS provides a stable and reliable power supply, effectively mitigating the disruptions caused by voltage fluctuations and power outages. This article will explore the functions and advantages of UPS systems, as well as their significant impact on our personal and professional lives.

17

2025

/

09

Key Design Considerations for EPS Emergency Power Supplies

Key Design Considerations for EPS Emergency Power Supplies

EPS emergency power supplies can be described as an emerging industry that has experienced rapid growth only in the past two years. Compared with the well-established UPS technology, EPS systems share some similarities but also exhibit key differences. Specifically, both technologies are designed to maintain AC power supply to the load during utility power failures or outages, and both employ IGBT inverter technology and pulse-width modulation (PWM) techniques.

08

2025

/

08

Power protection: UPS uninterruptible power supplies ensure you’re prepared for unexpected power outages.

Power protection: UPS uninterruptible power supplies ensure you’re prepared for unexpected power outages.

Electricity is an indispensable energy source in modern life; however, sudden power outages can occur, disrupting our daily routines and work. To address this challenge, UPS (uninterruptible power supplies) have been developed to provide a stable power supply, serving as a vital safeguard for uninterrupted electricity.

10

2025

/

07

< 12 >